55--4411
[Exercise 5.4.4-1] Needle Select
Call the design in #37 Room and set the order of needle bars like 7-
3-5-1-6-4-2-1.
Call the design in #35 Room as in <Fig. 5.2-6>.
(For design call, see “5.2 Design Call”.)
Press .
Use the up/down buttons on the setting menu to move to “Needle Bar Parameter setting” and press
.
Move to the needle bar choice menu.
As in <Fig. 5.4.4-4>, Add, Delete, Function, and Previous keys become enabled. The cursor is located on No. 1
for order choice.
To Next Page
Loading...
Need help?
General
