TC-Helicon Voicelive 2 Basic Manual

Back Panel
11
6. DIGITAL IN/OUT - The S/PDIF-formatted
DIGITAL OUT is always active. Selecting this DIGITAL
IN instead of the USB digital input is done in the I/O tab
of the SETUP menu.
7. PEDAL Input - A standard expression pedal can be
connected here to control the level of the Harmony and
Doubling voices. Calibration is done in the EXPRESSION
tab of the SETUP menu.
8. MIDI Connectors - A computer or controller
keyboard connected to the MIDI IN offers preset
control, realtime parameter control, and guidance of the
harmony voices. MIDI IN and OUT can also be used as
an alternative to the USB connection for backup and
restore operations.
9. USB I/O - USB is a standard computer connection
allowing transfer of digital audio to and from VoiceLive
2 as well as for MIDI control and MIDI preset backup.
Configuration of the digital audio and MIDI settings is
done in the SETUP menu.
10. POWER In - Connect only the supplied adaptor
or one with the exact specifications shown on the back
of VoiceLive 2.
11. POWER Switch - Press to turn VoiceLive 2 on
and off.

TC-Helicon Voicelive 2 Specifications

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Power

external power supply mains voltage	100 to 240 VAC, 50 to 60 Hz
power consumption	<14 W

Analog Inputs

mic input impedance	2.14/1.07 kOhm
line input impedance	13/6.5 kOhm
guitar input impedance	1 MOhm

Analog Outputs

output impedance	100/50 Ohm
output range	16 dBu / 0dBu
dynamic range	> 109 dB, 20 Hz to 20 kHz

Weight and Dimensions

dimensions	13.8" x 3" x 8.5" (350 x 76 x 216)
weight	5 lb. (2.3 kg)