TC-Helicon Voicelive 2 Basic Manual

16
How To Audition Presets
The best way to s ample VoiceLive 2’s effects is to
start with preset #1, sing, and then tap the PRESET up
footswitch to audition the next preset. These factory
presets contain collections of settings that affect your
voice in different ways.
Holding PRESET up or down will automatically cycle in
that direction. When working close to the unit, you can
also use the DATA WHEEL to cycle through presets.
Finding Presets With The Wizard
Press the WIZARD button to search for presets by
“Tags” which are preset attributes. Choosing a single
tag will result in a broad search; adding successive tags
(up to 3 total) will narrow your search. When you edit
and store presets, you can assign tags yourself to assist
in searching later.
The Wizard can also list the presets in alphabetical order
when you change the Sort setting.
First Impressions
Using Harmony Presets
Most presets that have the HARMONY footswitch lit
require that you play your guitar, keyboard or music
source (AUX input) to arrange the harmony intervals
musically around your voice. There are, however,
presets where the HARMONY footswitch can be lit but
that do not require musical input from you such as when
the harmony intervals are unisons, octaves or fixed shifts
used to create doubling and special effects.
If you want to audition presets without a music source,
simply press the HARMONY footswitch to mute this
effect each time you load a new preset.
You can read more about using harmony in the
following sections:
o VoiceLive 2 for the Guitarist/Singer
o VoiceLive 2 for the MIDI Keyboardist/Singer
o VoiceLive 2 for the Lead Singer

TC-Helicon Voicelive 2 Specifications

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Power

external power supply mains voltage	100 to 240 VAC, 50 to 60 Hz
power consumption	<14 W

Analog Inputs

mic input impedance	2.14/1.07 kOhm
line input impedance	13/6.5 kOhm
guitar input impedance	1 MOhm

Analog Outputs

output impedance	100/50 Ohm
output range	16 dBu / 0dBu
dynamic range	> 109 dB, 20 Hz to 20 kHz

Weight and Dimensions

dimensions	13.8" x 3" x 8.5" (350 x 76 x 216)
weight	5 lb. (2.3 kg)