EasyManuals Logo
Home>TC-Helicon>Recording Equipment>Voicelive 2

TC-Helicon Voicelive 2 Basic Manual

TC-Helicon Voicelive 2
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
First Impressions
20
Activating BYPASS + TUNER Mode
Press and hold the FX footswitch to remove all effects
from your voice except TONE (when active). The Tone
feature remains active in BYPASS + TUNER (Bypass)
so your voice does not sound darker when switching to
Bypass for speaking or singing with no effects.
If you have a guitar connected to the GUITAR IN, its
output will be muted in Bypass and the Tuner display
will become active so you can tune silently.
Tap the FX or any other footswitch to exit Bypass mode
and return to the previous display screen.
Changing The Mix
The effects balance in VoiceLive 2 is adjusted at the
factory to suit many situations. The Mix/Edit knobs
change the levels of :
o the combined Harmony and Doubling voices,
o the combined Delay and Reverb effects
o your guitar and its Guitar FX (as long as GUITAR
THRU jack is unused)
o the overall output level
NOTE: These adjustments are “global” meaning they
affect all presets by the same amount.
With the HOME button lit, turn any of the 4 MIX knobs.
This will present the MIX screen where you can see and
adjust these levels. After approximately 3 seconds the
display will revert back to the HOME screen. Your new
balance will remain in effect each time you power up the
unit until they are changed again.
If you want to adjust the level of a music source
connected to the AUX IN, you can do so with the AUX
LEVEL setting in the SETUP menu under the I/O tab.

Other manuals for TC-Helicon Voicelive 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TC-Helicon Voicelive 2 and is the answer not in the manual?

TC-Helicon Voicelive 2 Specifications

Operating Environment IconOperating Environment
operating temperature32° F to 122° F (0° C to 50° C)
storage temperature-22° F to 167° F (-30° C to 70° C)
humidityMax. 90 % non-condensing
Power IconPower
external power supply mains voltage100 to 240 VAC, 50 to 60 Hz
power consumption<14 W
Analog Inputs IconAnalog Inputs
mic input impedance2.14/1.07 kOhm
line input impedance13/6.5 kOhm
guitar input impedance1 MOhm
Analog Outputs IconAnalog Outputs
output impedance100/50 Ohm
output range16 dBu / 0dBu
dynamic range> 109 dB, 20 Hz to 20 kHz
Weight and Dimensions IconWeight and Dimensions
dimensions13.8" x 3" x 8.5" (350 x 76 x 216)
weight5 lb. (2.3 kg)

Related product manuals