94
9NETWORK SERV
ICES
DMS-CTC-20110713-0016 v2.0
9.4 Network Time Server
Introduction
A Network Time Server is a server that makes sure that the time settings of your device (your MediaAccess Gateway) are
in sync with the official time.
This time will be used for features like:
Access Control
For more information, see “10.3 Access Control” on page 105.
Wireless Time Control
For more information, see “10.4 Wireless Time Control” on page 107.
Call logs
Event logs
Requirements
Your MediaAccess Gateway must be connected to the Internet.
Specifying a time server for your MediaAccess Gateway
Proceed as follows:
1 Browse to the MediaAccess Gateway GUI.
For more information, see “Accessing the MediaAccess Gateway GUI” on page 37.
2 On the MediaAccess Gateway menu, click Configuration.
3 The System Configuration page appears. On the Navigation bar, click Configure.
4 Under Time Configuration, select Auto-configuration and configure the following settings:
To Next Page
Loading...
Need help?
General
