To Next Page

To Previous Page

3 MANUAL INSTALLATION

DMS-CTC-20110713-0016 v2.0

3 Manual Installation

Installation

This chapter will help you to manually install your MediaAccess Gateway.

Setting up your network

Proceed as follows:

1 Connect your MediaAccess Gateway to your service provider’s network.

For more information, see “3.1 Connecting the MediaAccess Gateway to your Service Provider’s Network” on page 22.

2 Power on the MediaAccess Gateway.

For more information, see “3.2 Powering on the MediaAccess Gateway” on page 27.

3 Connect your computer to the MediaAccess Gateway.

For more information, see “3.3 Connecting Your Network Devices to the MediaAccess Gateway” on page 28.

4 Configure your MediaAccess Gateway.

For more information, see “3.4 Configure the MediaAccess Gateway” on page 31.

5 Connect your (DECT) phones.

For more information, see “6 Telephony” on page 51.

6 Share your content or media on your local network, continue with “8 Sharing Content” on page 69.

7 If you purchased the mobile USB adapter, setup the 3G backup connection.

For more information, see “3.5 Setting Up the 3G Fall-Back WAN Connection” on page 32.

8 Once you successfully installed your MediaAccess Gateway, it is recommend to backup your configuration. This will

allows you to return to this configuration when needed (for example, after misconfiguration). For more information, see

“4.2 Backing Up/Restoring your Configuration” on page 41.

Technicolor tg799 User Manual

Other manuals for Technicolor tg799