To Next Page

To Previous Page

8 SHARING CONTENT

DMS-CTC-20110713-0016 v2.0

8.2.1 Configuring the UPnP AV Media Server

Introduction

The Network File Server is enabled by default and ready to use.

Enabling/disabling the UPnP AV Media Server

Proceed as follows:

1 Browse to the MediaAccess Gateway GUI.

For more information, see “Accessing the MediaAccess Gateway GUI” on page 37.

2 On the Tools menu, click Content Sharing.

3 In the Navigation bar, click Configure.

4 Under UPnP AV Media Server, click Server Enabled.

5 Click Apply.

Media Database

When you plug in your USB storage device, the MediaAccess Gateway will automatically start building the media database.

This database contains all meta data of the media files stored on your USB storage device.

To view the status of the media database:

1 Browse to the MediaAccess Gateway GUI.

For more information, see “Accessing the MediaAccess Gateway GUI” on page 37.

2 On the Tools menu, click Content Sharing.

3 In the Navigation bar, click Configure.

4 Under UPnP AV Media Server, you can find the Database Status.

5 If you want to rebuild the database, click Rebuild.

Technicolor tg799 User Manual

Other manuals for Technicolor tg799