11
1 GETTING STARTED
DMS-CTC-20110713-0016 v2.0
1.3.5 Buttons
Overview
Info button
The Info ( ) button allows you to enable the status LEDs. For more information, see “1.3.6 Status LEDs” on page 12.
DECT Pairing/Paging button
If you press the DECT pairing/paging button:
Between 1 and 5 seconds, the MediaAccess Gateway pages all connected DECT phones.
Longer than 5 seconds, switches to registration mode to allow you to connect your DECT phone(s) to the integrated
DECT base station of the MediaAccess Gateway.
For more information, see “6.1.1 Connecting a DECT Phone to Your MediaAccess Gateway” on page 53.
WPS button
The WPS ( ) button allows you to add new wireless clients to your network in a swift and easy way, without the need to
enter any of your wireless settings manually.
For more information, see “5.1 Connecting Your Wireless Client via WPS” on page 44.
ECO button
The ECO ( ) button allows you to disable your wireless access point. You can do this when you are not using the wireless
access point. This allows you to save the energy that the MediaAccess Gateway would be using for the wireless access point.
For more information, see “ECO button” on page 67.
The LED on the ECO button summarizes the overall status of your MediaAccess Gateway. For more information, see
“ECO LED” on page 12.
Reset button
The Reset button allows you to reset your MediaAccess Gateway to factory defaults.
For more information, see “11.7 Reset to Factory Defaults” on page 116.
To Next Page
Loading...
Need help?
General
