To Next Page

To Previous Page

3 MANUAL INSTALLATION

DMS-CTC-20110713-0016 v2.0

3.4 Configure the MediaAccess Gateway

Introduction

If your service provider did not preconfigure your MediaAccess Gateway, you may have to configure the MediaAccess

Gateway via its Graphical User Interface (GUI).

Requirements

JavaScript must be enabled on your web browser (this is the default setting). For more information, consult the help of your

web browser.

Procedure

Proceed as follows:

1 Open your web browser.

2 The MediaAccess Gateway informs you that you have not yet configured your MediaAccess Gateway.

If this window does not appear, browse to http://dsldevice.lan

or to the IP address of your MediaAccess Gateway (by

default: 192.168.1.254

) and click MediaAccess Gateway on the menu on the left-hand side.

3 Click Setup my MediaAccess Gateway.

4 The Easy Setup wizard appears. This wizard will guide you through the configuration of your MediaAccess Gateway.

Click Next and follow the instructions.

Technicolor tg799 User Manual

Other manuals for Technicolor tg799