Technicolor tg799 User Manual

53
6 TELEPHONY
DMS-CTC-20110713-0016 v2.0
6.1.1 Connecting a DECT Phone to Your MediaAccess
Gateway
Introduction
The MediaAccess Gateway is equipped with a DECT base station allowing you to connect up to five DECT phones.
Before you can start using your DECT phone, you first have to pair it with your MediaAccess Gateway.
Procedure
Proceed as follows:
1 Put the MediaAccess Gateway in pairing mode. You can do either of the following:
 Press the DECT button on the MediaAccess Gateway until the DECT LED on the front panel starts flashing.
 Via the MediaAccess Gateway GUI.
1 On the To o l b o x menu, click Te l e p h o n y.
2 Under Pick a task, click DECT pairing.
2 Put your DECT phone in pairing mode.
Consult your DECT phone’s user documentation to register your DECT phone.
3 Your DECT phone prompts you that If the registration is successful, the message “Registered to base x” appears on the
screen of your Technicolor DECT phone.

Technicolor tg799 Specifications

General

Brand	Technicolor
Model	tg799
Category	Gateway
Language	English