81
(Continued)
Illumination on the top cover
“ILLUMINATION”
The top cover illuminates when this unit is turned
on. (The light of top cover turns off when the top
cover is opened.)
• The factory default is “Mode2”. To disable this
function, select “Off”.
Mode1:
The top cover always illuminates.
Mode2:
The top cover illuminates only when a playable CD
is inserted and the input source is “CD”.
Operation sound setting
“Beep”
You can turn the beep sound on/off for the touch
switch operation.
• The factory default is “On”. To disable this
function, select “Off”.
Network settings
“Network”
Wi-Fi setting
“Wi-Fi”
The wireless LAN function can be enabled or
disabled.
• The factory default is “Off”.
Wi-Fi signal strength
“Signal Level”
To check the Wi-Fi signal strength where this system
is located.
• The signal strength is shown as 3 (max) - 2 - 1. If
the indicator shows “2” or “1”, change the position
or angle of your wireless router or this system, and
see if the connection improves.
• If “0” is displayed, this system cannot establish a
link with the wireless router.
To Next Page
Loading...
Need help?
General
