Options
7–2
1720/1721
the installation of these instruments. Only a brief description is provided here,
for more information contact a Tektronix field office or distributor. Dimensional
cabinet drawings are located in Section 3 (Installation)
This is a plain, silver-grey cabinet that is designed for permanent mounting. The
pattern of ventilating holes in top, bottom, and sides provides adequate air
circulation for any heat generated within the instrument. When being perma-
nently mounted, care must be taken to allow the free circulation of air to and
from these ventilating holes.
This is a silver-grey, metal cabinet, with feet and carrying handle designed for
portable applications. A TEKTRONIX BP1 can easily be mounted to this
cabinet to provide a 12 Vdc power source for portable operation.
This is a 19-inch, rack mounting adapter that accepts two 1700-Series instru-
ments in a side-by-side configuration. Instrument cabinets are 1700F00 that are
connected together for this installation. If only one 1700-Series instrument is to
be installed in the Side-by-Side Rack Adapter, a blank panel (1700F06) can be
installed for appearance, and air flow protection.
Ordering
Any of these items can be ordered with the 1720/1721 instrument. In addition,
these items are available, along with accessory items listed in this manual, from
your nearest Tektronix field office or distributor. Be sure to include both the
name and number of any Field Upgrade Kits ordered.
Plain Cabinet (1700F00)
Carrying Case (1700F02)
Side-by-Side Rack
Adapter (1700F05)
To Next Page
Loading...
Need help?
General
