Tektronix RSA5BUP Technical Reference

Specifications
Table 9: Amplitude and RF flatness (excluding mismatch error)
1
(cont.)
Characteristic Description
Frequency response (5 °C to 40 °C), typical
100 Hz to 32 MHz (LF Band)
±0.8 dB
9kHzto3GHz
(RSA5103B/5106B)
±0.5 dB
1MHzto3GHz
(RSA5115B/5126B)
±0.5 dB
3GHzto6.2GHz
(RSA5106B/5115B/5126B)
±1.0 dB
6.2 GHz to 15 GHz
(RSA5115B/5126B)
±1.0 dB
All RF attenuator
settings, Preamp
OFF
15 GHz to 26.5 GHz
(RSA5126B)
±1.5 dB
1 MHz to 32 MHz, LF Band
(RSA5103B/5106B)
±0.8 dB
1MHzto3GHz
±0.8 dB
3GHzto6.2GHz
(RSA5106B/5115B/5126B)
±1.3 dB
6.2 GHz to 15 GHz
(RSA5115B/5126B)
±1.5 dB
Attenuator = 10 dB,
Preamp ON, typical
15 GHz to 26.5 GHz
(RSA5126B)
±2.0 dB
(RSA5103B/5106B)
±0.3 dB
Input attenuator switching
uncertainty
(RSA5115B/5126B)
±0.15 dB
Absolute amplitude accuracy at calibration point (RF)
±0.31 dB
Absolute amplitude accuracy at calibration point, preamp ON
±0.5 dB
A
bsolute amplitude accuracy at calibration point (LF Band)
±0.31 dB
Absolute amplitude accuracy at calibration point (LF Band)
preamp ON (Only for RSA5103B/5106B)
±0.5 dB
Absolute amplitude accuracy at all center frequencies (18 °C to
28 °C)
2
, typical, 95% confidence
10MHzto3GHz
±0.3 dB
3 GHz to 6.2 GHz (RSA5106B/5115B/5126B)
±0.5 dB
6.2 GHz to 15 GHz (RSA5115B/5126B)
±0.75 dB
15 GHz to 26.5 GHz (RSA5126B)
±0.9 dB
Level Linearity
±0.1 dB (0 dB to –70 dB Below Reference Level)
1
All amplitude and frequency response measurements made with Preamp OFF, except where noted, and Flattop window filter used to maximize CW amplitude
measurement accuracy.
2
Reference Level  –15 dBm, –15 dBm to –50 dBm. 10 Hz  RBW  1 MHz, after alignment performed.
RSA5100B Series Technical Reference 9

Tektronix RSA5BUP Specifications

General

Brand	Tektronix
Model	RSA5BUP
Category	Measuring Instruments
Language	English