Tektronix TBS1000C Series User Manual

How to enable / disable measurement in the oscilloscope
Use this procedure to enable / disable waveform measurements manually.
NOTE.
■
To disable or enable the measurement function requires a password. The
default factory password is 000000.
■
An instructor in a TekSmartlab
™
equipped education lab can enable or
disable Measurement from the TekSmartLab application, for all the
connected oscilloscopes.
1. Push Utility.
2. Push Feature Enable side-menu button.
Analyzing a waveform
TBS1000C Series Oscilloscopes User Manual 99

Tektronix TBS1000C Series Specifications

General

Brand	Tektronix
Model	TBS1000C Series
Category	Test Equipment
Language	English