Tektronix TBS1000C Series User Manual

Default save folder location rules
■
The new save folder location remains in effect until:
■
A new location is set with the Change Folder button.
■
The oscilloscope is powered down. The save location changes back to the
top level of the USB drive.
■
The following actions do not change the file save location. The oscilloscope
shows an error message when it tries to save the file to a location that it
cannot find. Use the Change Folder function to change the working folder
location to an existing folder and try the save operation again.
■
Deleting the save location folder.
■
Removing or inserting a USB drive.
■
Pushing the Default Setup front-panel button.
Creating a new folder on the USB drive
Use this procedure to create a new folder on the USB drive.
1. Push the Save Recall front-panel button.
2. Push the File Browser side-menu button.
3. Use the Multipurpose knob to navigate to the location at which to create the
new folder.
Using the USB file utility functions
140 TBS1000C Series Oscilloscopes User Manual

Tektronix TBS1000C Series Specifications

General

Brand	Tektronix
Model	TBS1000C Series
Category	Test Equipment
Language	English