Tektronix TBS1000C Series User Manual

What is Autoset
The functional check used the Autoset button to display a stable waveform.
Autoset automatically adjusts the oscilloscope acquisition, horizontal, trigger,
and vertical controls to display five or six waveform cycles for an active
(displayed) channel. This powerful function can save you time when you need to
view an unknown signal. See the Autoset topic for more information. See Using
Autoset on page 65.
Probes and ground leads tip
When taking a
real
measurement, use
the shortest
possible ground
lead and signal
path to minimize
probe-induced
ringing and
distortion on the
measured signal.
Signal with a short length ground
lead
Signal with a long ground lead
Getting acquainted with the oscilloscope
28 TBS1000C Series Oscilloscopes User Manual

Tektronix TBS1000C Series Specifications

General

Brand	Tektronix
Model	TBS1000C Series
Category	Test Equipment
Language	English