Tektronix TBS1000C Series User Manual

Inverting the input signal
Use this procedure to invert (flip vertically) the signal. A typical reason to invert
a signal is to use the inverted signal to create a math waveform.
1. Push the Vertical Menu button for the channel input that you want to set.
2. Push -More- Page 1/2 side-menu button.
3. Push the Invert side-menu button to toggle between Off for normal operation
and On to invert the polarity of the signal in the preamplifier.
Setting channel input parameters
46 TBS1000C Series Oscilloscopes User Manual

Tektronix TBS1000C Series Specifications

General

Brand	Tektronix
Model	TBS1000C Series
Category	Test Equipment
Language	English