Tektronix TBS1000C Series User Manual

How to enable/disable Autoset in the oscilloscope
Use this procedure to enable/disable the Autoset function to set up a waveform
manually.
NOTE. To disable or enable the Autoset function requires a password. The default
factory password is 000000.
1. Push Utility.
2. Push Feature Enable side-menu button.
Acquisition setup
TBS1000C Series Oscilloscopes User Manual 67

Tektronix TBS1000C Series Specifications

General

Brand	Tektronix
Model	TBS1000C Series
Category	Test Equipment
Language	English