Tektronix TBS2000 Series User Manual

DATa:SOUrce
Sets or queries which waveform will be transferred from the instrument by the
CURVe? query. You can transfer only one waveform at a time.
Group
Waveform
Syntax
DATa:SOUrce{CH1|CH2|CH3|CH4|MATH|REF1|REF2}
DATa:SOUrce?
Related Commands
CURVe on page 87
Arguments
CH1–CH4 specifies which analog channel data will be transferred from the
instrument to the controller, channels 1 through 4.
MATH specifies that the math waveform data will be transferred from the
instrument to the controller.
REF1–REF2 specifies which reference waveform data will be transferred from
the instrument to the controller, waveforms, 1 or 2.
Examples
DATA:SOURCE CH1 specifies that the channel 1 waveform will be transferred
in the next CURVe? query.
DATa:SOUrceREF1 specifies that reference waveform REF1 will be transferred
in the next CURVe? query.
DATa:SOUrce? might return :DATA:SOURCE REF2 indicating that the source
for the waveform data which is transferred using a CURVe? query is reference 2.
D commands
TBS2000 Series Programmer 91

Tektronix TBS2000 Series Specifications

General

Brand	Tektronix
Model	TBS2000 Series
Category	Test Equipment
Language	English