Tektronix TBS2000 Series User Manual

DIAg:FAN
Returns the currently set PWM fan value. Only query.
Group
Calibration and diagnostic
Syntax
DIAg:FAN?
Examples
DIAG:FAN? might return PWM=10, VOL=7.4V.
DIAg:LOOP:OPTion
Sets the self-test loop option.
Group
Calibration and diagnostic
Syntax
DIAg:LOOP:OPTion {ALWAYS|FAIL|ONFAIL|ONCE|NTIMES}
Arguments
ALWAYS continues looping until the self tests (diagnostics) are stopped via the
front panel or by an instrument command.
FAIL causes looping until the first self test (diagnostic) failure or until self tests
(diagnostics) are stopped.
ONFAIL causes looping on a specific test group as long as a FAIL status is
returned from the test.
ONCE executes self test (diagnostics test) sequence once.
NTIMES runs “n” number of loops.
Examples
DIAg:LOOP:OPTion ONCE sets diagnostics to run one loop of self tests.
D commands
TBS2000 Series Programmer 97

Tektronix TBS2000 Series Specifications

General

Brand	Tektronix
Model	TBS2000 Series
Category	Test Equipment
Language	English