Texas Instruments TI-83-Plus Software Guide


TIp 6: Using Lists
Fundamental Topics in Science © 2001 Texas Instruments

TIp 6-2

Try-It!
Ë
on Your TI

83 Plus
Set Up the List Editor
Use the commands
ClearAllLists
and
SetUpEditor
to reset the list editor.
To Do This Press Display
1. Display the list editor.
Note:
Your list editor may vary. The following
commands will clear and set up lists
L1
through
L6
in your list editor.
g
1:Edit
2. Return to the Home screen and clear
it. Then clear all lists in the list editor
by selecting
ClearAllLists
.
Note:
This command clears all elements from the
lists. The list names are still in memory, but the
lists are empty.
Hint
: In the
CATALOG
, you can go to the first item
starting with a particular letter:
Press
C
(
q
). Notice that you are already in
ALPHA
mode since the
º
displays in the upper
right corner.
- l :
- |
# until
ClrAllLIsts
is
selected
b
b
3. Setup the list editor with
SetUpEditor
.
Hint:
You also can select
SetUpEditor
by pressing
g
5
.
- |
# until you highlight
SetUpEditor
b
b
4. Display the list editor.
Note:
Lists
L
1
through
L
6
appear and are clear,
and there is a blank list following
L
6
.
g
1:Edit

Texas Instruments TI-83-Plus Specifications

General

Brand	Texas Instruments
Model	TI-83-Plus
Category	Calculator
Language	English