ThermoSpas Designer Series User Manual

27
Temperature Lock/Unlock (TL)
To prevent unauthorized use adjustment to the temperature of the spa, you can lock the
temperature set point. The Warm and Cool buttons are deactivated. When this feature is
active the “TL” indicator light will be lit.
To lock the panel (buttons must be pressed within three seconds of each other):
1. Press the Warm ( ) or Cool ( ) button.
2. Press the Time ( ) button.
3. Press the Jets Pump 1 ( ) button.
4. Press the Warm ( ) button.
To unlock the panel (buttons must be pressed within three seconds of each other):
1. Press the Time ( ) button.
2. Press the Jets Pump 1 ( ) button.
3. Press the Cool ( ) button.
Programming Fahrenheit or Celsius
You can program the temperature to display in either Fahrenheit (°F) or Celsius (°C). To access
this feature:
1. Press the Warm ( ) button.
2. Press the Jets Pump 1 ( ) button.
3. Press the Light ( ) button.
4. Press the Warm ( ) or Cool ( ) button to scroll the menus until the LCD screen
displays “USr.”
5. Press the Jets Pump 1 ( ) button to enter the user preference menu.
6. Press the Warm ( ) or Cool ( ) button to scroll the sub-menus until the LCD screen
displays “tc.”
7. Press the Warm ( ) or Cool ( ) button to toggle between “Y” (for Celsius) and “n” (for
Fahrenheit) to make a selection.
8. Press the Jets Pump 1 ( ) button to conrm and select your setting.
9. Press the Light ( ) button twice to exit to programming menus.
Programming the Time in a 12-hour or 24-hour Format
You can program the time to read in either a 12-hour or 24-hour conguration. To access this
feature:
1. Press the Warm ( ) button.
2. Press the Jets Pump 1 ( ) button.
3. Press the Light ( ) button.
4. Press the Warm ( ) or Cool ( ) button to scroll the menus until the LCD screen
displays “USr.”
5. Press the Jets Pump 1 ( ) button to enter the user preference menu.
6. Press the Warm ( ) or Cool ( ) button to scroll the sub-menus until the LCD screen
displays “24.”
7. Press the Warm ( ) or Cool ( ) button to toggle between “Y” (for 24-hr format) and
“n” (for 12-hr format) to make a selection.
8. Press the Jets Pump 1 ( ) button to conrm and select your setting.
9. Press the Light ( ) button twice to exit to programming menus.
TL
Programming Instructions

ThermoSpas Designer Series Specifications

General

Brand	ThermoSpas
Model	Designer Series
Category	Hot Tub
Language	English