TomTom GO 6200 User Manual

129
Note: You should plug the USB cable directly into a USB port on your computer and not into a
USB hub or USB port on a keyboard or monitor.
When set-up is complete, a TomTom account is created and your GO is linked to that account.
You can now access MyDrive Connect from the notification area on your desktop.
MyDrive Connect starts automatically after the account is created.
Connecting to the internet using USB
If you are unable to connect to the internet using Bluetooth or Wi-Fi or prefer a different method,
you can connect to the internet using a USB connection to a computer.
This means that you can still gain all the benefits of Syncing using TomTom MyDrive.
To connect to the internet using USB, do the following:
1. Make sure your computer has a working internet connection.
2. Connect your device to your computer using the supplied cable.
3. Open or install MyDrive Connect on your computer. For help, go to tomtom.com/getstarted.
Once MyDrive Connect is open, your computer's internet is shared with your device.

TomTom GO 6200 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Languages support	Multi
Traffic Message Channel (TMC)	-
Map coverage	All Europe
Lifetime map updates	Roads change, but with Lifetime Map Updates your map will always be up to date. Start fresh every few months by downloading a new edition of the industry's most accurate map. New editions are issued four times per year.
Pixel density	154 ppi
Display diagonal	6 \
Display resolution	800 x 480 pixels
Storage media type	Flash
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Internal storage capacity	16 GB
Form factor	Fixed
Product color	Black, Grey
Supported radio bands	Not supported
Power source type	Battery, Cigar lighter
Battery life (max)	1 h
Cables included	USB

Weight and Dimensions

Width	- mm
Weight	- g