ELECTRICAL
7-2
Toro TITAN 2009-2013 Service Manual
7
How It Works
• PTO Switch ON (Switch Pulled Up)
The PTO Switch provides battery voltage from the key
switch to the PTO clutch.
The PTO Switch provides battery voltage from the key
switch to the hour meter.
As a part of the safety interlock system, the PTO switch
will prevent the engine from cranking/starting when in
the ON position by preventing the starter solenoid from
grounding through the kill relay.
Note: The engine will not crank over to start when
the PTO switch is ON.
• PTO Switch OFF (Switch Pushed Down)
The PTO Switch will not supply battery voltage to the
PTO clutch.
The PTO Switch provides battery voltage from the key
switch to the parking brake switch and neutral switches
as a part of the Safety Interlock System to allow the unit
to crank / start (Fig. 134).
PTO Switch
Purpose
The PTO (Power Take Off) switch is used to turn on the
Electric PTO Clutch and to function as part of the safety
interlock system.
Location
The PTO switch is located on the control panel, on the
right fender (Fig. 133).
Fig. 133 PICT-2001
Fig. 134 PICT-2002