Toro titan zx Service Manual

CHASSIS
3-22
Toro TITAN 2009-2013 Service Manual
3
5. Lubricate the brake handle pivot bolt (B) friction
surface with a light coating of engine assembly lube.
6. Install the parking brake handle into the motion
control box and torque the mounting fastener (B) to
specication – 17 ft-lbs. (23 Nm).
7. Install the parking brake linkage rod to the handle
stud using the washer and clip (A).
8. Install the LH control cover and torque the (1)
mounting fastener to specication - 5 ft-lbs. (7 Nm).
9. Install and connect the battery.
10. Inspect for proper brake function.
11. Verify proper parking brake function.
(Fig. 046)
Fig. 045 PICT-2046
Parking Brake & Linkage Installation
1. Position the brake bell crank (H) into the frame pivot
holes.
2. Install the pivot bushings (G), washers and cotter
pins to secure the bell crank into the frame.
3. Install the (3) linkage rods to the bell crank and
install retaining washers and clips (E), and (D).
4. Install the brake return spring (c) (Fig. 045).
Fig. 046 PICT-2078
Apply Thin Coating of Engine Assembly Lube
1”
Apply Thin Coating of Engine Assembly Lube
B
H
E
E
E
E
F
G
C
D

Toro titan zx Specifications

General

Brand	Toro
Model	titan zx
Category	Lawn Mower
Language	English