111
Using the TV’s Advanced Features
Setting up the Network
Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or
TKIP, the Speed value might be low. We recommend that the Encryption
setting is changed to AES (Under manual setup).
When manually setting the IP Address, set Auto Setup to Off.
Advanced Network Setup
IP Address Setup
The settings in Auto Setup are linked to those selected in the DNS Setup
menu. If Auto Setup is set to On, then Auto Setup in the DNS Setup menu
will also be set to On.
Auto Setup:
1 Press the MENU button.
2 Select Network > Network Setup > Advanced Network
Setup and press the OK button.
3 Pressthe▲/▼(arrow)buttonstoselectIP Address Setup and
then press the OK button.
4 Pressthe▲/▼(arrow)buttonstoselectAuto Setup and press
the OK button.
5 Pressthe▲/▼(arrow)buttontoselectOn.
Other items are grayed out when Auto Setup is set to On.
Manual Setup:
1 Press the MENU button.
2 Select Network > Network Setup > Advanced Network
Setup and press the OK button.
3 Pressthe▲/▼(arrow)buttonstoselectIP Address Setup and
then press the OK button.
4 Pressthe▲/▼(arrow)buttonstoselectAuto Setup and press
the OK button.
5 Pressthe▲/▼(arrow)buttontoselectOff.
6 Pressthe▲/▼(arrow)buttontoselectIP Address.