To Next Page

To Previous Page

Setting up your TV

Selecting the PIN code

2 Highlight Stable Sound, and then press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectOn.

Stable Sound

cannot be used at the same time as DTS TruSurround

The feature is greyed out until DTS TruSurround

is turned Off.

Using the Dolby

Digital Dynamic Range Control feature

You can further compress Dolby

Digital dynamic range, allowing

you to switch from digital to analog broadcasts at the same dynamic

range.

To use the Dolby

Digital Dynamic Range Control:

1 Press the MENU button and open the Sound menu.

2 Highlight Dynamic Range Control, and then press the OK button.

3 Pressthe▲/▼(arrow)buttonstoselectOn, and then press the OK

button.

v This feature is available when the TV is tuned to a digital RF channel

or an HDMI

input with the Dolby

Digital signal.

Selecting the PIN code

A PIN code is necessary for some menus.

v The Parental Control and Locks menu is grayed out if no PIN has

been set.

Enter a new PIN code

1 Press the MENU button and open the Options menu.

2 Highlight Parental PIN Setup, and then press the OK button.

3 Usethenumberbuttonstoentera4-digitnumber.Conrmthecode.

Forgotten PIN code

While the PIN code entering screen is displayed, press the INFO

buttonfourtimeswithinveseconds.ThePINcodewillbecleared

and you can enter a new PIN code.

Toshiba 65L5400UC User Manual

Other manuals for Toshiba 65L5400UC