Toshiba 65L5400UC User Manual

96
Setting up your TV
Using HDMI® CEC
Other HDMI
®
CEC functions
When the Enable HDMI CEC Control and each item in the
HDMI CEC Control Setup menu are set to On, the following
functions will be enabled.
Item: Description:
TV Auto Power If an HDMI
®
CEC device is turned on, the TV turns on automatically.
Auto Standby If the TV is turned off, the TV will send a message to turn off all of the
HDMI
®
CEC devices connected to the TV.
Amplifier Control If Amplifier Control is set to On, you can adjust the sound volume or
turn off the sound using the remote control.
Initial Speaker Setting From this item, you can set your audio output preference to the TV
speakers or the audio receiver speakers. When this item is set to
Receiver, the TV remote can be used to adjust or mute the volume of the
audio. This item will be grayed out when Amplifier Control is set to
Off.
When you turn on the Audio Receiver, change its input source or adjust
the sound volume, the sound will be output from the audio receiver’s
speakers even if TV Speakers have been selected. Turn the TV off and on
again to output the sound from the TV speakers.
Setting up HDMI
®
CEC
To set the HDMI
®
CEC Setup:
1 From the Options menu, highlight HDMI CEC Control
Setup and press the OK button.
2 Highlight Enable HDMI CEC Control, and then press the
OK button.
3 Select On, and then press the OK button.
If you select Enable HDMI CEC Control Off, the other items will be
grayed out.
4 Pressthe▲/▼(arrow)buttonstohighlighttheHDMI
®
CEC
Setup item you want to use, and press the OK button, follow by
▲/▼(arrow)buttons.
v TV Auto Power: On/Off
v Auto Standby: On/Off
v Amplier Control: On/Off
v Initial Speaker Setting: TV/Receiver

Toshiba 65L5400UC Specifications

General

Brand	Toshiba
Model	65L5400UC
Category	LCD TV
Language	English