65
Setting up your TV
Using the 4:3 Stretch
Using the Auto Aspect feature
When this feature is set to On, the TV will automatically select the
picture size when one of the following input sources is received:
v A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE
input.
v 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from
the HDMI
®
inputs.
Aspect Ratio of Signal
Source
Automatic Aspect Size (automatically selected when Auto
Aspect is On)
4:3 Normal 4:3
4:3 Letter Box TheaterWide 2
16:9 Full Full
Not defined (no ID-1
data or HDMI
®
aspect
data)
The current picture size you selected, see “Selecting the
picture size” on page 60.
To turn on the auto aspect ratio feature:
1 Press the MENU button and open the Picture menu.
2 Highlight Display Settings, and then press the OK button.
3 In the Auto Aspecteld,presstheOK button, and then select
On.
To turn off the Auto Aspect ratio feature, Select Off in step 3 above.
Using the 4:3 Stretch
When 4:3 Stretch is activated, the TV displays 4:3 programs as a
full-screen picture.
1 From the Picture menu, highlight Display Settings, and then
press the OK button.
2 Pressthe▲/▼(arrow)buttonstoselect4:3Stretch,andthen
press the OK button.
3 Pressthe▲/▼(arrow)buttonstoselectOn or Off, and then
press the OK button
This feature is available when Auto Aspect is set to On.
Using the Auto Aspect feature
To Next Page
Loading...
Need help?
General