- 38 -
2.6 Installation under Windows Vista/Server 2008 / 7 /
Server2008R2 / 8 / Server2012 / Server2012R2 / 10 (USB with
Plug & Play Enabled)
Note: If an undefined device is created after installation of the printer driver, follow the procedure described in the
section If plug-and-play installation fails under Windows Vista / Server2008 / 7 / Server2008R2 / 8 /
Server2012 / Server2012R2 / 10.
1. Turn on the PC.
Note: Log on as the user with administrative privilege.
2. Turn on the printer and connect it to the PC with a USB cable.
3. Installation of the device driver software is automatically started.
4. After a while, the printer driver installation is completed.
5. When the installation is completed, a new printer icon is added to the Printer folder.
To Next Page
Loading...
Need help?
General