PMV
Header unit (MMY-MAP1604*) Follower unit (MMY-MAP1204*)
4-Way valve
Pressure sensor
(high pressure)
O.S.
Pressure sensor
(low pressure)
Accumulator
Compressor
1
Compressor
2
Compressor
3
Liquid tank
Balance pipe
Liquid pipe
Gas pipe
Liquid pipe
Gas pipe
4-Way valve
Pressure sensor
(low pressure)
Pressure sensor
(high pressure)
O.S.
Liquid tank
Accumulator
Compressor
1
Compressor
2
Indoor unit
High-pressure gas or condensate liquid refrigerant
Evaporative gas refrigerant (low-pressure gas)
Normal refrigerant line
Note: The "header unit" is the outdoor unit to which the indoor-outdoor communication
line is connected. All other outdoor units are called "follower units".
Note: With a 14 or 16 HP outdoor unit, the main heat exchanger and sub-heat
exchanger may be switched over depending on the outside temperature and
air conditioning loads.
(The diagram shows a 28 HP system (16 HP + 12 HP) as an example.)