EasyManuals Logo
Home>Toshiba>Inverter>TOSVERT VF-S15 series

Toshiba TOSVERT VF-S15 series User Manual

Toshiba TOSVERT VF-S15 series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
E6581913
3
1. General outlines of the communication function
This manual explains the RS485 communications interface function provided for the TOSVERT
VF-S15 series of industrial inverters.
The TOSVERT VF-S15 series of inverters can be connected to a computer or a controller (herein-
after referred to as the computer) for data communications via USB converter (USB001Z).
By writing computer programs, you can monitor the operating status of the inverter, control its op-
eration in various ways from the computer, and change and store parameter settings on storage
devices.
The communication protocol is preparing the Toshiba inverter protocol and the Modbus RTU proto-
col. Please choose selection of a protocol with a communication protocol selection parameter
().
<Computer link>
By preparing the program (explained later), the following information can be exchanged between
the computer and the inverter.
Monitoring function (used to monitor the operating status of the inverter: Output frequency,
current, voltage, etc.)
Command function (used to issue run, stop and other commands to the inverter)
Parameter function (used to set parameters and read their settings)
As for data communications codes, the TOSVERT VF-S15 series of inverters support the binary
(HEX) code, in addition to the JIS (ASCII) code. The communications function is designed on the
assumption that the JIS (ASCII) code is used for communications between the inverter and the
personal computer, and the binary (HEX) code for communications between the inverter and the
microcomputer built into the controller. A communication number is used to access the desired data
item.
* The smallest unit of information that computers handle is called a “bit (binary digit),” which repre-
sents the two numbers in the binary system: 1 or 0. A group of 16 bits is referred to as a “word,”
which is the basic unit of information the VF-S15 series of inverters use for data communications.
One word can handle data items of 0 to FFFFH in hexadecimal notation (or 0 to 65535 in decimal
notation).
BIT15 BIT8 BIT7 BIT0
1 bit
1 word
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Table of Contents

Other manuals for Toshiba TOSVERT VF-S15 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba TOSVERT VF-S15 series and is the answer not in the manual?

Toshiba TOSVERT VF-S15 series Specifications

General IconGeneral
BrandToshiba
ModelTOSVERT VF-S15 series
CategoryInverter
LanguageEnglish

Related product manuals