Toshiba TOSVERT VF-S15 series User Manual

E6581913
23
4.5. Examples of the use of communication commands
Here are some examples of the use of communication commands provided for the VF-S15 series of
inverters.
Inverter numbers and checksum used in ASCII mode are omitted from these examples.
 Examples of communication
- To run the motor in forward direction with the frequency set to 60 Hz from the computer
<ASCII mode>
Computer  Inverter
Inverter  Computer
(PFA011770)
CR (PFA011770)CR …Set the operation frequency to 60 Hz.
(60 / 0.01 Hz = 6000 = 1770H)
(PFA00C400)
CR (PFA00C400)CR …Set to “forward run” with commands and frequency
instruction from the computer enabled.
<Binary mode>
Computer  Inverter
Inverter  Computer
2F 50 FA 01 17 70 01 2F 50 FA 01 17 70 01
2F 50 FA 00 C4 00 3D 2F 50 FA 00 C4 00 3D
- To monitor the output frequency (during 60 Hz operation)
<ASCII mode>
Computer  Inverter
Inverter  Computer
(RFD00)
CR (RFD001770)CR …Set the operation frequency to 60 Hz.
(600.01Hz=6000=1770H)
<Binary mode>
Computer  Inverter Inverter  Computer
2F 52 FD 00 7E 2F 52 FD 00 17 70 05
- To monitor the status of the inverter
<ASCII mode>
Computer  Inverter Inverter  Computer
(RFD01)
CR (rFD010003)CR …For details on statuses, see “8.2. Monitoring from
the computer”. (Stop status, FL output status, trip
status (r command))
<Binary mode>
Computer  Inverter
Inverter  Computer
2F 52 FD 01 7F 2F 72 FD 01 00 03 A2
- To check the trip code (when the inverter is tripped because of err5)
…For details on trip codes, see “Trip code monitor” in “8.2. Monitoring
from the computer”. (18H = 24d “err5” trip status)
<ASCII mode>
Computer  Inverter
Inverter  Computer
(RFC90)CR (rFC900018)CR
<Binary mode>
Computer  Inverter Inverter  Computer
2F 52 FC 90 0D 2F 72 FC 90 00 18 45
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Toshiba TOSVERT VF-S15 series Specifications

General

Brand	Toshiba
Model	TOSVERT VF-S15 series
Category	Inverter
Language	English