FU-4
FUEL SYSTEM - Injection Nozzle
INJECTION NOZZLE
REMOVAL OF INJECTION NOZZLE HOLDERS
FR Vehicles
No.2 Air Intake Manifold Injection Nozzle Holder
PCV Hose lloek Nut
Nozzle Gasket P.-Fuel Return Pipe
___....____... l "'ij- Fuel Hose
__ ,--' i
\ Nonie Seat
Injection Pipe
FF Vehicles
Lock Nut Fuel Hose
Fuel Return Pipe~•~
I lnjedion Nozzle Holder
S Nozzle Seat
,,'-.___ Noz:zle Gasket
Injection Pipe
--
FUEL SYSTEM - Injection Non ie
1. REMOVE NO. 2 AIR INTAKE MANIFOLD
WITH AIR·CLEANER CASE (CE70)
FU-5
(a) Disconnect PCV hose f rom the cylind er head cover.
NOTE: Do not remove the ventilation tube and connector
unless necessary.
(b) Remove the two bolts. frve nuts and seals and lift off
the No . 2 air intake manifold with the air cleaner case.
2. DISCONNECT FUEL HOSES FROM INJECTION PUMP
(CV, CT150 w / HAC)
Loosen the clips and disconnect the fuel hoses between
the injection pump and fue l pipes from the injection pump
side.
3. REMOVE INJECTION PIPES
(al Remove the injection pipe clamps.
(b) Disconnec t both ends of the injection pipes from the
injection pump and injection holders.
4 . REMO VE FUEL RETURN PIPE
(a) Disco nnect the fuel hose from the return pipe .
(b) Remove the four lock nuts and return pipe with the
four gaskets.
5. REMOVE INJECTION NOZZLE HOLDERS
(a) Using SST, remove the four injection nozzle holde rs.
SST 09268-6 4010
(b) Arrange the injection nozzle holders in order.
(c) Remove the nozzle seats and nozzle gaske ts.
To Next Page
Loading...
Need help?
General
