325
2007 TUNDRA from Jul. ’07 Prod. (OM34463U)
Z18023
To enter the code of the language you
want to read, use the joystick to enter the
appropriate 4−digit language code. For de-
tails about the language codes, see the
language code list.
Push the “ENT” button on the controller. If
numbers which are not on the list are en-
tered and the “ENT” button is pushed, the
“Incorrect code” screen will appear. Enter
the language code you want to read
again.
To return to the “Select DVD Lang.”
screen, push the “Back” switch on the
screen.
Z18024
TURNING THE ANGLE MARK ON OR
OFF
The angle mark can be turned on for
discs that are multi−angle compatible.
Each time you push the “Angle Mark”
switch on the screen, the angle mark
turns on or off alternately.
Z18025
SETTING LEVEL OF VIEWER
RESTRICTIONS
You can restrict the play back screen by
setting the viewer restrictions. You can
prevent the restriction with a password.
Some discs do not supply a restriction.
To set the level of viewer restriction, push
the “Parental Lock” switch on the “Setup
Menu” screen. The “Enter Personal Code”
screen will appear.
07 04.26
To Next Page
Loading...
Need help?
General
