360
2007 TUNDRA from Jul. ’07 Prod. (OM34463U)
If the PIN is to be changed:
“There is a PIN number in place. Push
the talk switch and say the correct PIN
number.” is heard and “Current PIN?” is
displayed.
1. Follow voice guidance instructions, or
use the “AUDIO/CONTROL” knob to in-
put the current PIN number.
“Please push the talk switch and say a
four−digit PIN number.” is heard.
2. Push the talk switch and say “XXXX
(new PIN number)”.
“The PIN number has been set. Returning
to the security.” is heard and “Completed”
is displayed.
If the current number is not correct, the
system may not function properly.
To lock the phone book
1. Push the talk switch and say “Phone
book lock”, or turn the
“AUDIO/CONTROL” knob until “Phbk
Lock” is displayed and push the knob.
“There is a PIN number in place. Push
the talk switch and say the correct PIN
number.” is heard and “PIN?” is displayed.
2. Follow voice guidance instructions, or
turn the “AUDIO/CONTROL” knob to
select a number.
When using a voice command:
“XXXX Push the talk switch and say
confirm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
Follow voice guidance instructions, or turn
the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the knob.
“PIN number accepted. The phone book is
now locked. Returning to the main menu.”
is heard and “Locked” is displayed.
When using the knob:
1. Turn the “AUDIO/CONTROL” knob to
select a number. Push the
“AUDIO/CONTROL” knob to set.
2. When the PIN number is set, push the
“AUDIO/CONTROL” knob.
“XXXX Push the talk switch and say
confirm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
3. Follow voice guidance instructions, or
turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“PIN number accepted. The phone book is
now locked. Returning to the main menu.”
is heard and “Locked” is displayed.
07 04.26