359
2007 TUNDRA from Jul. ’07 Prod. (OM34463U)
To enter the security menu
1. Push the off−hook switch to turn the
hands−free system on.
2. Follow voice guidance instructions, or
turn the “AUDIO/CONTROL” knob until
“Setup” is displayed and push the
knob.
“Setup. Please push the talk switch and
say security, or phone setup.” is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO/CONTROL” knob until
“Security” is displayed and push the
knob.
“Security. Push the talk switch and say
set PIN, phone book lock, or phone book
unlock.” is heard.
To set a PIN
Push the talk switch and say “Set PIN”,
or turn the “AUDIO/CONTROL” knob until
“Set PIN” is displayed and push the knob.
“There is no PIN number set. Please
register a PIN number. Please push the
talk switch and say a four−digit PIN
number.” is heard.
When using a voice command:
1. Push the talk switch and say “XXX
(new PIN number)”.
2. Follow voice guidance instructions, or
turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“The PIN number has been set. Returning
to the security.” is heard and “Completed”
is displayed.
When using the knob:
1. Turn the “AUDIO/CONTROL” knob to
select a number. Push the
“AUDIO/CONTROL” knob to set.
2. Repeat the above procedure until the
entire four−digit number is set.
3. When the PIN is set, push the
“AUDIO/CONTROL” knob.
4. Follow voice guidance instructions, or
turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“The PIN number has been set. Returning
to the security.” is heard and “Completed”
is displayed.
07 04.26