Toyota 2007 Tundra User Manual

417
2007 TUNDRA from Jul. ’07 Prod. (OM34463U)
(a) Programming the HomeLink
R
The HomeLink
R
in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
HomeLink
R
, install a new battery in the
hand−held transmitter prior to program-
ming.
The battery side of the hand−held trans-
mitter must be pointed away from the
HomeLink
R
during the programming pro-
cess.
For Canadian users, follow the procedure
in “Programming an entrance
gate/Programming all devices in the
Canadian market”.
1. Decide which of 3 HomeLink
R
buttons
you want to program.
XS10012
HomeLink
R
25 to
75 mm
(1 to
3 in.)
Hand−held
garage
transmitter
2. Place your hand−held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink
R
.
Keep the indicator light on the HomeLink
R
in view while programming.
XS10013
3. Simultaneously press and hold the
hand−held garage transmitter button
along with the selected HomeLink
R
but-
ton.
Do not release the buttons until step 4
has been completed.
4. When the indicator light on the
HomeLink
R
changes from a slow to a
rapid flash after 20 seconds, you can
release both buttons.
07 04.26

Toyota 2007 Tundra Specifications

General

Brand	Toyota
Model	2007 Tundra
Category	Automobile
Language	English