ENGINE DOES NOT CRANK NORMALLY
When the ignition key switch is turned
ON,
the starter motor does not respond, or makes an abnormal noise.
I
Phenomenon
I
Main places for inspection and adjustment
I
Starter does not respond
[Point
I]
1.
Battery
2.
Battery cables
3.
Ignition key switch
4.
Starter unit
5.
Neutral safety switch
I
Slow cranking speed or clicking sound
12.
Starter motor
I
3.
Engine body (When all the plugs are removed, the engine
should rotate easily.)
I
1.
Battery
[Point
I]
To test whether the fault is with the circuit to the starter motor, or
with the starter motor itself, connect the starter motor directly to the
battery with the
30
terminal and
50
terminal leads. If the starter
motor turns, then the fault is in the circuit. If it does not turn, then
the fault is in the motor.
"Rev and rattle" sound
1.
Starter clutch
2.
Ring gear
3.
Magnetic switch
To Next Page
Loading...
Need help?
General
