Toyota Navigation System RAV4 - DELETING a Bluetooth DEVICE

50
2. Bluetooth
®
SETTINGS
RAV4_Navi+MM_OM42A43U_(U)
15.08.10 11:04
 For details about operating the Bluetooth
®
device, see the manual that comes with it.
 To cancel the registration, select “Can-
cel”.
4 Register the Bluetooth
®
device using
your Bluetooth
®
device.
 A PIN-code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth
®
devices. Depending on the
type of Bluetooth
®
device being con-
nected, a message confirming registra-
tion may be displayed on the Bluetooth
®
device’s screen. Respond and operate the
Bluetooth
®
device according to the confir-
mation message.
5 Check that the screen is displayed
when registration is complete.
 The system waits for connection requests
coming from the registered device.
 At this stage, the Bluetooth
®
functions are
not yet available.
6 Select “OK” when the connection sta-
tus changes from “Connection wait-
ing...” to “Connected”.
 If an error message is displayed, follow
the guidance on the screen to try again.
1 Display the “Bluetooth* Setup” screen.
(P.48)
2 Select “Remove”.
3 Select the desired device.
4 Select “Yes” when the confirmation
screen appears.
5 Check that a confirmation screen is
displayed when the operation is com-
plete.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
DELETING A Bluetooth
®
DEVICE
INFORMATION
● When deleting a Bluetooth
®
phone, the
contact data will be deleted at the same
time.