EasyManuals Logo
Home>TP-Link>Wireless Access Point>TL-WA5110G

TP-Link TL-WA5110G User Manual

TP-Link TL-WA5110G
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
21
Figure 4-9 MAC Address Clone
Some ISPs require that you register the MAC Address of your adapter, which is connected to your
cable/DSL Modem or Ethernet during installation. Changes are rarely needed here.
¾ WAN MAC Address - This field displays the current MAC address of the WAN port, which is
used for the WAN port. If your ISP requires that you register the MAC address, please enter
the correct MAC address into this field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).
¾ Your PC's MAC Address - This field displays the MAC address of the PC that is managing
the router. If the MAC address is required, you can click the Clone MAC Address To button
and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click Save to save your settings.
)
Note:
1) Only the PC on your LAN can use the Clone MAC Address To feature.
2) If you click Save, the router will prompt you to reboot.
4.6 Wireless
Figure 4-10 Wireless menu
There are eight submenus under the Wireless menu (shown in Figure 4-10):Basic Settings,
Wireless Mode, Security Settings, MAC Filtering, Wireless Statistics, Distance Setting,
Antenna Alignment and Throughput Monitor. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are provided
below.
4.6.1 Basic Settings
The basic settings for the wireless network in AP Client Router operation mode are set on this
page.

Table of Contents

Other manuals for TP-Link TL-WA5110G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WA5110G and is the answer not in the manual?

TP-Link TL-WA5110G Specifications

General IconGeneral
2.4 GHzYes
ModulationBPSK, CCK, DBPSK, DQPSK, DSSS, OFDM, QPSK
Frequency band2.4 - 2.4835 GHz
Cabling technology10/100Base-T(X)
Receiver sensitivity54M: -74dBm 48M: -76dBm 36M: -81dBm 12M: -89dBm 11M:-90dBm 9M:-91dBm 5.5M:-92dBm 1M:-94dBm
Maximum data transfer rate54 Mbit/s
Frequency range2400 - 2483.5 MHz
Maximum operating distance50000 m
Compliance industry standardsIEEE 802.11b, IEEE 802.11g
Non-operating relative humidity (non-condensing)5 - 95 %
Antenna gain level (max)4 dBi
InternalNo
CertificationCE FCC
Supported network protocolsPPPoE, IP
Ethernet LAN (RJ-45) ports1
Output power description12 V
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)165 x 108 x 28 mm

Related product manuals