EasyManuals Logo
Home>TP-Link>Wireless Access Point>TL-WA5110G

TP-Link TL-WA5110G User Manual

TP-Link TL-WA5110G
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
62
Operating Mode, Signal, SSID, Channel, Mode, MAC Address and IP Address.
¾ Traffic Statistics - This field displays the AP's traffic statistics.
¾ System Up Time - The time of the AP running from it's powered on or reset.
5.3 Quick Setup
Please refer to Section 3.2: "Quick Setup."
5.4 Operation Mode
The AP supports three operation modes, AP Client Router, AP Router and AP. Please select
one your want. Click Save to save your choice. Figure 5-2:
Figure 5-2 Operation Mode
¾ AP Client Router: In this mode, the device enables multi-user to share the Internet from
WISP. All LAN ports share the same IP from WISP through Wireless port. While connecting to
WISP, the Wireless port works as a WAN port in AP Client mode. The Ethernet port acts as a
LAN port.
¾ AP Router: In this mode, the device enables multi-user to share the Internet via ADSL/Cable
Modem. The wireless port share the same IP to ISP through Ethernet WAN port. The Wireless
port acts same as a LAN port while in AP mode.
¾ AP: In this mode, the device allows wireless communication devices to access a wireless
network by using WIFI. The Ethernet port and the wireless port both work as LAN ports.
5.5 Network
Click Network on the main menu. You can configure the IP parameter on the following page .
Figure 5-3 Network
¾ IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default:
192.168.1.1).
¾ Subnet Mask - An address code that determines the size of the network. Normally use

Table of Contents

Other manuals for TP-Link TL-WA5110G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WA5110G and is the answer not in the manual?

TP-Link TL-WA5110G Specifications

General IconGeneral
2.4 GHzYes
ModulationBPSK, CCK, DBPSK, DQPSK, DSSS, OFDM, QPSK
Frequency band2.4 - 2.4835 GHz
Cabling technology10/100Base-T(X)
Receiver sensitivity54M: -74dBm 48M: -76dBm 36M: -81dBm 12M: -89dBm 11M:-90dBm 9M:-91dBm 5.5M:-92dBm 1M:-94dBm
Maximum data transfer rate54 Mbit/s
Frequency range2400 - 2483.5 MHz
Maximum operating distance50000 m
Compliance industry standardsIEEE 802.11b, IEEE 802.11g
Non-operating relative humidity (non-condensing)5 - 95 %
Antenna gain level (max)4 dBi
InternalNo
CertificationCE FCC
Supported network protocolsPPPoE, IP
Ethernet LAN (RJ-45) ports1
Output power description12 V
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)165 x 108 x 28 mm

Related product manuals