58
Figure 4-59 System Log
The router can keep logs of all traffic. You can query the logs to find what happened to the router.
Click the Refresh button to refresh the logs.
Click the Clear Log button to clear all the logs.
4.13.10 Remote Management
You can configure the Remote Management function on this page shown in Figure 4-60. This
feature allows you to manage your Router from a remote location via the Internet.
Figure 4-60 Remote Management
¾ Web Management Port - Web browser access normally uses the standard HTTP service
port 80. This router’s default remote management Web port number is 80. For greater
security, you can change the remote management Web interface to a custom port by entering
that number in this box provided. Choose a number between 1 and 65534, but do not use the
number of any common service port.
¾ Remote Management IP Address - This is the current address you will use when accessing
your router from the Internet. The default IP Address is 0.0.0.0. It means this function is
disabled. To enable this function, change the default IP Address to another IP Address as
desired. If it is set to 255.255.255.255, all the hosts can access the router from internet.
To access the router, you will type your router's WAN IP Address into your browser's Address (in
IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example,
if your Router's WAN address is 202.96.12.8 and you use port number 8080, enter in your
browser: http://202.96.12.8:8080
. You will be asked for the router's password. After successfully
entering the password, you will be able to access the router's Web-based utility.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
