EasyManuals Logo
Home>TP-Link>Wireless Access Point>TL-WA5110G

TP-Link TL-WA5110G User Manual

TP-Link TL-WA5110G
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
34
Figure 4-24 DHCP Clients List
¾ Index(ID)- The index of the DHCP Client
¾ Client Name - The name of the DHCP client
¾ MAC Address - The MAC address of the DHCP client
¾ Assigned IP - The IP address that the router has allocated to the DHCP client.
¾ Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will
request to renew the lease automatically.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click on the Refresh button.
4.7.3 Address Reservation
When you specify a reserved IP address for a PC on the LAN, that PC will always receive the
same IP address each time when it accesses the DHCP server. Reserved IP addresses should
be assigned to servers that require permanent IP settings. This page is used for address
reservation (shown in Figure 4-25).
Figure 4-25 Address Reservation
¾ MAC Address - The MAC address of the PC which you want to reserve IP address for.
¾ Reserved IP Address - The IP address of the router reserved.
¾ Status - It shows whether the entry is enabled or not.
¾ Modify – To modify or delete an existing entry.
To Reserve IP addresses:
1. Click the Add New button in the page of Address Reservation, the following page(Figure
4-26) will display.
2.
Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and IP
address in dotted-decimal notation of the computer you want to add.
3. Click the Save button after finish configuring.

Table of Contents

Other manuals for TP-Link TL-WA5110G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WA5110G and is the answer not in the manual?

TP-Link TL-WA5110G Specifications

General IconGeneral
2.4 GHzYes
ModulationBPSK, CCK, DBPSK, DQPSK, DSSS, OFDM, QPSK
Frequency band2.4 - 2.4835 GHz
Cabling technology10/100Base-T(X)
Receiver sensitivity54M: -74dBm 48M: -76dBm 36M: -81dBm 12M: -89dBm 11M:-90dBm 9M:-91dBm 5.5M:-92dBm 1M:-94dBm
Maximum data transfer rate54 Mbit/s
Frequency range2400 - 2483.5 MHz
Maximum operating distance50000 m
Compliance industry standardsIEEE 802.11b, IEEE 802.11g
Non-operating relative humidity (non-condensing)5 - 95 %
Antenna gain level (max)4 dBi
InternalNo
CertificationCE FCC
Supported network protocolsPPPoE, IP
Ethernet LAN (RJ-45) ports1
Output power description12 V
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)165 x 108 x 28 mm

Related product manuals