EasyManuals Logo
Home>TP-Link>Wireless Access Point>TL-WA5110G

TP-Link TL-WA5110G User Manual

TP-Link TL-WA5110G
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
75
Figure 5-15 Distance Setting
¾ Use Default Setting: Keep the default setting if the AP is used for indoor environment. If
you want to change the distance, please uncheck the Use Default Setting box.
¾ Distance: Specify the distance value in kilometers, accurate to the first decimal place. If the
distance is set too short or too long, it will result poor connection and throughput
performance, it is best to set the value at 110% of the real distance. If the AP is being used
in an indoor setting, please use the default setting.
Click Save to keep your settings.
5.6.7 Antenna Alignment
This page shows how remote AP’s signal strength changes while changing the antenna’s
direction.
Figure 5-16 Antenna Alignment
Remote AP RSSI - Remote AP's signal strength value.
Signal percent - The ratio of RSSI to RSSI RANGE in percentage.
RSSI RANGE - You can drag the slider bar to set or input the RSSI RANGE value. The
slider bar allows the range of the meter to be either increased or reduced. If the range is
reduced, the color change will be more sensitive to signal fluctuations. The slider bar
actually changes an offset of the maximum indicator value scale.
)
Note:
It only works after you have established connection to remote AP under client mode

Table of Contents

Other manuals for TP-Link TL-WA5110G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WA5110G and is the answer not in the manual?

TP-Link TL-WA5110G Specifications

General IconGeneral
2.4 GHzYes
ModulationBPSK, CCK, DBPSK, DQPSK, DSSS, OFDM, QPSK
Frequency band2.4 - 2.4835 GHz
Cabling technology10/100Base-T(X)
Receiver sensitivity54M: -74dBm 48M: -76dBm 36M: -81dBm 12M: -89dBm 11M:-90dBm 9M:-91dBm 5.5M:-92dBm 1M:-94dBm
Maximum data transfer rate54 Mbit/s
Frequency range2400 - 2483.5 MHz
Maximum operating distance50000 m
Compliance industry standardsIEEE 802.11b, IEEE 802.11g
Non-operating relative humidity (non-condensing)5 - 95 %
Antenna gain level (max)4 dBi
InternalNo
CertificationCE FCC
Supported network protocolsPPPoE, IP
Ethernet LAN (RJ-45) ports1
Output power description12 V
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)165 x 108 x 28 mm

Related product manuals