TL-WA801ND 300Mbps Wireless N Access Point User Guide
Chapter 1 Introduction
1.1 Product Overview
The TL-WA801ND 300Mbps Wireless N Access Point is dedicated to Small Office/Home Office
(SOHO) wireless network solutions. It allows for greater range and mobility within your wireless
network while also allowing you to connect the wireless devices to a wired environment. Increased
mobility and the absence of cabling will be beneficial for your network.
With using IEEE 802.11n wireless technology, your device can transmit wireless data at the rate of
up to 300Mbps. With multiple protection measures, including SSID broadcast control and wireless
LAN 64/128/152-bit WEP encryption, WiFi protected Access (WPA2- PSK, WPA- PSK), the
TL-WA801ND 300Mbps Wireless N Access Point delivers complete data privacy. This device
leverages some 802.11n features to provide improved performance and coverage compared to
802.11a/g devices, and fully interoperates with 802.11n products if they are Wi-Fi CERTIFIED, but
it does not conform to all of the requirements in the IEEE specification and is not classified as "n"
in the Wi-Fi CERTIFIED program.
It supports an easy, web-based setup for installation and management. Even though you may not
be familiar with the Access Point, you can easily configure it with the help of this Guide. Before
installing the AP, please look through this Guide to get the full information of the TL-WA801ND
300Mbps Wireless N Access Point.
1.2 Conventions
The AP or TL-WA801ND, or device mentioned in this User guide stands for TL-WA801ND
300Mbps Wireless N Access Point without any explanations.
Parameters provided in the pictures are just references for setting up the product, which may differ
from the actual situation. You can set the parameters according to your demand.
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
