EasyManuals Logo

TP-Link TL-WA801ND User Manual

TP-Link TL-WA801ND
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
TL-WA801ND 300Mbps Wireless N Access Point User Guide
Figure 4-9 Wireless menu
4.6.1 Wireless Settings
Selecting Wireless > Wireless Settings will enable you to configure the basic settings for your
wireless network on the screen below (Figure 4-10).This page allows you to configure the wireless
mode for your device. Six operation modes are supported here, including Access Point,
Multi-SSID, Client, WDS Repeater, Universal Repeater and Bridge with AP. The available
setting options for each operation mode are different from those of the other.
1) Access Point: This mode allows wireless stations to access this device.
Figure 4-10 Wireless Settings in Access Point mode
¾ Wireless Network Name - Identifies your wireless network name. Create a name up to 32
characters and make sure all wireless points in the wireless network with the same SSID. The
default SSID is TP-LINK_XXXXXX (XXXXXX indicates the last unique six characters of each
device’s MAC address). This value is case-sensitive. For example, TEST is NOT the same as
test.
¾ Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the device can be used. It may be illegal to use the wireless function of
24

Other manuals for TP-Link TL-WA801ND

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WA801ND and is the answer not in the manual?

TP-Link TL-WA801ND Specifications

General IconGeneral
5 GHzNo
Modulation16-QAM, 64-QAM, CCK, DBPSK, DQPSK, OFDM
Frequency band2.4 - 2.4835 GHz
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Receiver sensitivity270M: -68dBm@10% PER\\r 130M: -68dBm@10% PER\\r 108M: -68dBm@10% PER\\r 54M: -68dBm@10% PER\\r 11M: -85dBm@8% PER\\r 6M: -88dBm@10% PER\\r 1M: -90dBm@8% PER
Ethernet LAN data rates10, 100 Mbit/s
Maximum data transfer rate300 Mbit/s
Quality of Service (QoS) supportYes
Antenna typeExternal
Antenna featuresDetachable antenna
Antennas quantity2
Antenna connector typeRP-SMA
Antenna direction typeOmni-directional
Antenna gain level (max)5 dBi
WAN connectionEthernet (RJ-45)
USB 2.0 ports quantity-
Ethernet LAN (RJ-45) ports1
Output current0.6 A
Output voltage9 V
Output power description9VDC / 0.85A
Power over Ethernet (PoE) type supportedPassive PoE
Transmit power range0 - 20 dBmW
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
PlacementTable
CertificationCE, FCC, RoHS
Security algorithms128-bit WEP, 152-bit WEP, 64-bit WEP, SSID, WPA, WPA-PSK, WPA2, WPA2-PSK, WPS
Compatible operating systemsWindows 98SE, NT, 2000, XP, Vista, 7\\r MAC OS\\r NetWare\\r UNIX\\r Linux
Package depth223 mm
Package width310 mm
Package height70 mm
Package weight600 g
Weight and Dimensions IconWeight and Dimensions
Depth125 mm
Width181 mm
Height36 mm

Related product manuals