TL-WA801ND 300Mbps Wireless N Access Point User Guide
4.2 Status
Selecting Status will enable you to view the AP’s current status and configuration, all of which is
read-only.
Figure 4-3 Device Status
¾ Firmware Version - This field displays the current firmware version of the AP.
¾ Hardware Version - This field displays the current hardware version of the AP
¾ Wired - This field displays the current settings or information for the Network, including the
MAC address, IP address and Subnet Mask.
¾ Wireless - This field displays basic information or status for wireless function, including
Operating Mode, Wireless Network Name, Channel, Mode, Channel Width, Max Tx Rate
and MAC Address.
¾ Traffic Statistics - This field displays the AP's traffic statistics.
15
To Next Page
Loading...
