EasyManuals Logo

TP-Link TL-WA901N User Manual

TP-Link TL-WA901N
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
35
Chapter 4
Congure the Access Point
3. A success message will appear on the WPS page if the client device has been successfully
added to the access point’s network.
Method Three: Enter the Access Point’s PIN
1. Keep the WPS Status as Enabled and get the Current PIN of the access point.
2. Enter the access point’s current PIN on your client device to join the access point’s Wi-Fi
network.
4. 4. 4. Wireless MAC Filtering
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses. This function is not available when the operation
is set to Client. As the configuration is the same in each operation mode, here we just
take the Access Point for example.
Deny or allow specific wireless client devices to access my network by their MAC
addresses.
For example, you want the wireless client A with the MAC address 00-0A-EB-B0-00-
0B and the wireless client B with the MAC address 00-0A-EB-00-07-5F to access the
access point, but other wireless clients cannot access the access point.
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to Wireless > Wireless MAC Filtering.
3. Click Enable to enable the Wireless MAC Filtering function.
I want to:

Other manuals for TP-Link TL-WA901N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WA901N and is the answer not in the manual?

TP-Link TL-WA901N Specifications

General IconGeneral
5 GHzNo
2.4 GHzYes
Frequency band2400-2483.5 GHz
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100 Mbit/s
Maximum data transfer rate450 Mbit/s
Security algorithms64-bit AES, 128-bit AES, WPA, WPA-PSK, WPA2, WPA2-PSK
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
Output current0.85 A
Output voltage9 V
Power over Ethernet (PoE) type supportedPassive PoE
PlacementTable
Product colorWhite
Antenna typeExternal
Antennas quantity3
Antenna direction typeOmni-directional
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Number of products included1 pc(s)
Minimum system requirementsMicrosoft Windows 98SE/NT/2000/XP/Vista™/7/8/8.1/10, MAC OS, , NetWare, UNIX or Linux , Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other , Java-enabled browser , Cable or DSL Modem , Subscription with an Internet Service Provider (for Internet access)
Package depth223 mm
Package width370 mm
Package height70 mm
Package weight660 g
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth133.8 mm
Width194.8 mm
Height36.2 mm

Related product manuals