4
Chapter 1
Get to Know About Your Access Point
LED Explanation
Name Status Indication
(Power)
On Power is on.
Flashing
The system is starting up or the firmware is being upgraded. Do not
disconnect or power off your access point.
Off Power is off.
(Ethernet)
On The ETHERNET port is connected to a powered-on device.
Off The ETHERNET port is not connected to a powered-on device.
(Wireless)
On The wireless function is enabled.
Off The wireless function is disabled.
1. 2. 2. The Back Panel
The following parts (view from left to right) are located on the rear panel.
Ports or Buttons Description
ON/OFF To power on or off the access point.
POWER For connecting the access point to a power socket via the provided power adapter.
ETHERNET
One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or
a router.